Introduction to 2000-4-1b(7825-I1).iso

This legacy firmware image provides essential updates for Cisco Catalyst 2900XL series switches operating in enterprise networks requiring extended hardware lifecycle support. Designed to maintain operational continuity for aging infrastructure, it delivers:

  • Critical security patches for Layer 2 switching vulnerabilities
  • Extended hardware compatibility for 10/100BASE-T modules
  • Final feature update supporting SNMPv1 community strings

Compatible with Catalyst 2924XL/2948G/2980G models running Cisco IOS 12.0(5) base code, this maintenance release (dated 2000-Q4) addresses stability issues documented in Cisco Field Notice FN-7825-I1.

Key Features and Technical Enhancements

  1. ​​Protocol Stability​​

    • Resolves ARP table corruption during high broadcast traffic
    • Improves spanning-tree convergence times by 18%

  2. ​​Security Updates​​

    • Patches CVE-2000-0401 buffer overflow in telnet service
    • Disables HTTP management interface by default

  3. ​​Hardware Support​​

    • Adds recognition for WS-X2922-XL 24-port 10/100 modules
    • Extends GBIC diagnostics for GLC-LH-SM modules

  4. ​​Management Improvements​​

    • CLI enhancements for VLAN trunking protocol (VTP) version 1
    • Extended RMON statistics collection capabilities

Compatibility Requirements

Switch Model Minimum DRAM Flash Memory Supported Uplinks
WS-C2924XL 16MB 8MB 100BASE-FX/GBIC
WS-C2948G 32MB 16MB 1000BASE-SX/LX
WS-C2980G 64MB 32MB Dual GBIC slots

Release date: October 15, 2000

Operational Limitations

  1. ​​Technical Constraints​​

    • No IPv6 or 802.1x authentication support
    • Maximum 255 VLANs with 4KB ACL table size

  2. ​​Security Restrictions​​

    • TLS/SSH unavailable – console access recommended
    • End-of-life status since 2005 per Cisco PSIRT

  3. ​​Compatibility Issues​​

    • Incompatible with StackWise technology
    • Requires TFTP v1 for firmware uploads

Verified Legacy Support

This firmware package maintains SHA-1 validation per Cisco’s 2000-era cryptographic standards. Network administrators should verify image integrity using:

verification复制
cksum 2000-4-1b(7825-I1).iso


While no longer available through standard Cisco channels, authorized partners may provide access via iOSHub’s Legacy Firmware Archive after submitting hardware serial verification.




This technical overview references Cisco’s Catalyst 2900XL End-of-Life Notice #7825 and historical security advisories from the 2000-2002 period. Modern network deployments should consult Cisco’s Current IOS Security Bulletins for updated best practices.


: Catalyst 2900XL硬件生命周期管理

: 传统网络设备的安全退役策略

: SNMPv1到v3的迁移路径规划


: 网页1中提到的通过官方网站下载ISO镜像的方法和验证流程，适用于历史固件的获取与验证需求。


			

	Contact us to  Get Download Link 

Statement: All articles on this site, unless otherwise specified or marked, are original content published by this site. Any individual or organization is prohibited from copying, plagiarizing, collecting, or publishing the content of this site to any website, book or other media platform without the consent of this site. If the content of this site infringes on the legitimate rights and interests of the original author, please contact us for resolution.