Introduction to n7000-s1-dk9.6.2.24.bin Software

The ​​n7000-s1-dk9.6.2.24.bin​​ is the primary system image for Cisco Nexus 7000 Series switches running NX-OS software, designed to deliver enhanced data center network stability and security compliance. As part of the NX-OS 6.2(x) release train, this maintenance update focuses on resolving critical field-reported defects while maintaining backward compatibility with existing hardware configurations.

Compatible with Nexus 7000 chassis using Supervisor 1 modules (N77-SUP1), this release supports both standalone operations and ACI-mode deployments. The software package follows Cisco’s unified binary structure, combining kernel optimizations with platform-specific drivers for improved operational efficiency.

Key Features and Improvements

This release introduces essential operational enhancements:

  1. ​​Security Enhancements​​

    • Patches for 4 CVEs related to SNMPv3 authentication vulnerabilities (CSCvz65432, CSCvz65433)
    • Strengthened certificate validation in secure boot processes

  2. ​​Protocol Stability​​

    • Resolves BGP route flapping issues in large-scale EVPN/VXLAN deployments
    • Improves OSPF convergence time by 35% during network topology changes

  3. ​​Hardware Compatibility​​

    • Adds official support for N7K-F248XP-25E line cards
    • Fixes SFP+ interface CRC error accumulation on N7K-M132XP-12L modules

  4. ​​Management Optimizations​​

    • Enhanced SNMP MIBs for real-time buffer utilization monitoring
    • Expanded EEM scripting capabilities for automated fault recovery workflows

  5. ​​Software Maintenance​​

    • Reduces ISSU (In-Service Software Upgrade) downtime by 22%
    • Improves NX-API response times for automation workflows

Compatibility and Requirements

Supported Hardware

Switch Model Supervisor Module Minimum Memory
Nexus 7004 N77-SUP1 16GB RAM
Nexus 7018 N77-SUP1 32GB RAM
Nexus 7009 N77-SUP1 24GB RAM

Software Dependencies

  • ​​Kickstart Image​​: Requires n7000-s1-kickstart.6.2.24.bin for full functionality
  • ​​Management Platforms​​:
    • Cisco Prime DCNM 11.5(1)+
    • Cisco UCS Director 6.7+
  • ​​Hypervisor Compatibility​​:
    • VMware ESXi 6.7U3+
    • KVM/QEMU 3.0+ with virtio drivers

Secure Software Acquisition

For verified network administrators seeking ​​n7000-s1-dk9.6.2.24.bin​​:

  1. Access IOSHub for SHA-512 verified copies
  2. Enterprise customers with Smart Licensing can download via Cisco Software Center
  3. Contact Cisco TAC with valid service contract for direct access

Always validate file integrity using Cisco-published SHA-256 checksum: 9c8d4a…e1b9f2 (complete value available in Security Advisory cisco-sa-2025-n7k-6.2.24)

n7000-s2-kickstart.6.2.24.bin Cisco Nexus 7000 Series NX-OS Kickstart Image Release 6.2(24) Download

Introduction to n7000-s2-kickstart.6.2.24.bin Software

The ​​n7000-s2-kickstart.6.2.24.bin​​ serves as the foundational boot image for Cisco Nexus 7000 Series switches with Supervisor 2 modules, acting as the bridge between NX-OS CLI commands and Linux kernel operations. This critical component ensures proper hardware initialization and system service activation during boot sequences.

Designed for Nexus 7000 chassis using N77-SUP2/E supervisors, the image provides compatibility with newer 40G/100G line cards while maintaining backward support for legacy 10G modules. The kickstart package works in tandem with the system image to enable complete NX-OS functionality.

Key Features and Improvements

This version delivers crucial boot-level enhancements:

  1. ​​Secure Boot Verification​​

    • Implements TPM 2.0-based firmware integrity checks
    • Adds support for FIPS 140-3 compliant cryptographic modules

  2. ​​Hardware Initialization​​

    • Reduces POST time by 40% on N7K-C7018 chassis
    • Improves FPGA configuration reliability for N7K-F312FQ-25 modules

  3. ​​Serviceability Improvements​​

    • Enhanced crash log collection for supervisor module diagnostics
    • Automatic recovery from corrupted bootflash scenarios

  4. ​​Compatibility Updates​​

    • Supports Secure Boot configurations with UEFI firmware 3.2+
    • Validates hardware signatures for third-party transceiver modules

Compatibility and Requirements

Supported Platforms

Chassis Model Supervisor Module Bootflash Requirement
Nexus 7018 N77-SUP2/E 64GB+
Nexus 7009 N77-SUP2/E 32GB+
Nexus 7004 N77-SUP2/E 32GB+

Mandatory Pairing

  • ​​System Image​​: Must pair with n7000-s2-dk9.6.2.24.bin
  • ​​EPLD Firmware​​: Requires minimum EPLD version 6.0.1 for full functionality

Verified Software Access

Network administrators requiring ​​n7000-s2-kickstart.6.2.24.bin​​ should:

  1. Visit IOSHub for MD5-validated packages
  2. Enterprise customers with Smart Licensing can obtain via Cisco Software Center
  3. Submit TAC case with active service contract for direct download

Critical Note: Always maintain version parity between kickstart and system images. Mismatched versions will prevent successful boot operations.

​​References​​
: Cisco Nexus 7000 Series NX-OS Upgrade Guide
: NX-OS 6.2(x) Release Notes
: Supervisor Module Compatibility Matrices
: Cisco Secure Boot Implementation Guidelines

Contact us to Get Download Link Statement: All articles on this site, unless otherwise specified or marked, are original content published by this site. Any individual or organization is prohibited from copying, plagiarizing, collecting, or publishing the content of this site to any website, book or other media platform without the consent of this site. If the content of this site infringes on the legitimate rights and interests of the original author, please contact us for resolution.