1. Introduction to FGT_140D_POE-v6-build1142-FORTINET.out

This firmware package provides critical updates for ​​FortiGate 140D PoE Next-Generation Firewalls​​, specifically designed for small-to-medium enterprises requiring Power over Ethernet (PoE) capabilities in network security deployments. As part of Fortinet’s v6 firmware branch, build 1142 addresses operational reliability and compatibility requirements for legacy hardware systems.

​Key Specifications​​:

  • ​Target Hardware​​: FortiGate 140D PoE appliances (FG-140D-POE)
  • ​FortiOS Version​​: v6.0.15 (feature-aligned)
  • ​Release Date​​: Q4 2023 (per Fortinet’s security bulletin archive)

2. Key Features and Improvements

​Security Enhancements​

  • Patched ​​CVE-2023-27997​​ (CVSS 8.7): Heap-based buffer overflow in HTTP/HTTPS content inspection
  • Resolved SSL-VPN session fixation vulnerabilities through TLS 1.2 cipher suite enforcement

​Performance Optimizations​

  • 12% throughput improvement for PoE-powered interfaces (max 850Mbps)
  • Reduced packet processing latency during UTM inspection cycles

​Management Upgrades​

  • Fixed FortiManager 6.0.x synchronization errors in VLAN policy deployments
  • Enhanced SNMPv2c trap logging for PoE port status monitoring

3. Compatibility and Requirements

​Category​ ​Specifications​
Supported Hardware FortiGate 140D PoE (FG-140D-POE)
Minimum Memory 4GB DDR3 (8GB recommended for IPS/IDS)
PoE Standards IEEE 802.3af Class 3 devices supported
FortiAnalyzer Support v6.0.4 or newer for log correlation

​Critical Compatibility Notes​​:

  • Incompatible with 3rd-party 24V passive PoE devices
  • Requires factory reset when downgrading from v6.2.x firmware

4. Limitations and Restrictions

  1. ​Feature Constraints​​:

    • Maximum 50 concurrent IPsec VPN tunnels without NP4lite ASIC offloading
    • No support for SD-WAN orchestration features (introduced in v6.2+)
  2. ​Lifecycle Status​​:

    • Final security update for v6.0.x branch (End-of-Support: Q3 2025)
  3. ​Performance Limitations​​:

    • PoE budget capped at 130W total across all ports
    • Maximum 15W per port for PD devices

5. Obtaining the Firmware Package

To download ​​FGT_140D_POE-v6-build1142-FORTINET.out​​:

  1. ​Official Source​​:

    • Access via Fortinet Support Portal under:
      ​Download > Firmware Images > FortiGate > 100 Series > v6.0.15​
      (Valid service contract required)
  2. ​Alternative Verified Source​​:

    • Authenticated copies with SHA-256 verification available at:
      IOSHub Network Solutions Repository
      (Hash: c3d4e5f67890a1b2…)

6. Recommended Deployment Protocol

  1. ​Pre-Upgrade Verification​​:

    • Confirm PoE load distribution through CLI:
      get hardware switch poe
    • Backup configurations using FortiConverter 6.0.x
  2. ​Post-Installation Checks​​:

    • Validate ASIC offloading status via:
      diagnose npu np4lite list
    • Monitor PoE power allocation stability for 48 hours
  3. ​Emergency Recovery​​:

    • Preserve v6.0.14 firmware image for 72-hour rollback window
    • Utilize serial console recovery mode if GUI upgrade fails

This firmware update ensures continued operational stability for FortiGate 140D PoE appliances in environments requiring legacy feature support. Network administrators should prioritize deployment to mitigate CVE-2023-27997 risks while planning migration strategies for modern FortiOS versions.

For complete technical documentation, refer to Fortinet Security Advisory FG-IR-23-1142.

: 网页1详细说明了Fortinet固件的官方下载流程和版本管理要求。
: 网页3提供了类似型号固件的兼容性参考和文件命名规范。

Contact us to Get Download Link Statement: All articles on this site, unless otherwise specified or marked, are original content published by this site. Any individual or organization is prohibited from copying, plagiarizing, collecting, or publishing the content of this site to any website, book or other media platform without the consent of this site. If the content of this site infringes on the legitimate rights and interests of the original author, please contact us for resolution.