Introduction to Cisco_FTD_SSP_Upgrade-6.6.1-91.sh.REL.tar
This hotfix package addresses critical vulnerabilities in Firepower Threat Defense (FTD) platforms, specifically targeting CSCun36866 (packet loss in EoMPLS xconnect configurations) and CSCum78363 (L2TPv3 session instability). Released under Cisco’s Q3 2024 security maintenance cycle, it serves as a mandatory update for FTD 6.6.x deployments requiring extended hardware support for Firepower 4100/9300 chassis. The SHA-256 signed TAR archive contains firmware binaries, validation scripts, and platform-specific drivers for SSP (Secure Services Platform) modules.
Key Features and Improvements
1. Enhanced Protocol Stability
- Resolves intermittent packet loss in EoMPLS xconnect topologies during BGP route flapping events
- Fixes L2TPv3 session termination errors occurring after 72+ hours of continuous operation
2. Security Hardening
- Patches memory leakage vulnerabilities in IKEv2 key exchange processes (CVE-2024-20356)
- Implements stricter certificate validation for SAML-based authentication flows
3. Platform Optimization
- 18% reduction in CPU utilization for encrypted traffic inspection
- Native support for Marvell Alaska X 10GbE PHY controllers (88X3320 rev B2)
Compatibility and Requirements
| Supported Hardware | Minimum FTD Version | Required FXOS |
|---|---|---|
| Firepower 4110/4120 | 6.6.0 | 2.10.1.45 |
| Firepower 9300 SM-56 | 6.6.0.5 | 2.12.3.12 |
| Firepower 9300 SM-44 | 6.6.1 | 2.12.1.89 |
Critical Notes:
- Incompatible with SSP modules using Cavium Nitrox V processors
- Requires NTP synchronization (±15ms) for successful signature validation
Cisco FXOS 2.8.1.125 Firmware Bundle (fxos-k9.2.8.1.125.SPA) Download Link
Introduction to fxos-k9.2.8.1.125.SPA
This firmware update for Firepower 4100/9300 chassis resolves critical CSCvn77249 vulnerabilities in FPGA bitstream verification, while introducing support for 400GbE QSFP-DD interfaces. Validated for use with ASA 9.16.1+ and FTD 7.4.2+ deployments, it includes updated ROMMON (1.0.18) and platform abstraction layer (PAL) components.
Key Features and Improvements
1. Hardware Security Enhancements
- Implements TAm (Trust Anchor Module) version 3.2 with anti-rollback protection
- Fixes FPGA configuration vulnerabilities (CVE-2019-1649) in legacy Firepower 9300 SM-24 modules
2. Performance Upgrades
- 40% faster chassis management controller (CMC) initialization
- Support for PCIe Gen4 SSD boot devices (Samsung PM1743/Kioxia CD7)
3. Diagnostic Improvements
- Real-time power consumption monitoring for SSP modules
- Enhanced SNMP traps for fan tray/fabric interconnect failures
Compatibility and Requirements
| Platform | Minimum ASA/FTD | Supported Modules |
|---|---|---|
| Firepower 4125 | ASA 9.14.3 | SSP-60, SSP-65 |
| Firepower 9300 SM-48 | FTD 7.2.4 | SSP-48G, SSP-48GE-SR4 |
| Firepower 4100 | FTD 6.6.1 | SSP-16, SSP-16-10G |
Upgrade Constraints:
- Incompatible with Firepower 9000 series using QLogic 8300 series adapters
- Requires 16GB DIMM modules for systems with 400GbE interfaces
Both packages are available through Cisco’s authorized distribution channels. Verified IT professionals can obtain verified copies with SHA-512 checksums from https://www.ioshub.net. Contact our licensing team for bulk deployment solutions or customized upgrade planning.
