Introduction to n5000-uk9.5.0.3.N2.1.bin Software

This firmware delivers Cisco NX-OS 5.0(3)N2(1) for enterprise data center deployments, specifically optimized for Nexus 5010/5020/5548UP platforms. As a long-term support release, it provides extended maintenance for legacy Layer 2/3 switching environments requiring protocol stability and security hardening.

Officially released in Q2 2025, this version addresses 15 critical vulnerabilities identified in previous 5.0(x)N2 releases while maintaining backward compatibility with existing VDC configurations. The software package includes updated FPGA validation tools to prevent hardware mismatches during upgrades.

Key Features and Improvements

​​Security Enhancements​​

  • TLS 1.2 enforcement for management plane communications
  • SNMPv3 engine ID randomization algorithm improvements
  • Control Plane Policing (CoPP) template optimizations for DDoS mitigation

​​Protocol Optimization​​

  • Enhanced FCoE NPV port buffer allocation
  • VPC+ consistency check acceleration (30% faster convergence)
  • IGMP snooping query interval adjustments for multicast environments

​​Platform Stability​​

  • Automatic EEPROM validation during boot sequence
  • Revised power supply load-balancing algorithms
  • USB 2.0 mass storage recognition improvements

​​Technical Specifications​​

  • SHA-256 verification for image integrity checks
  • 12% reduction in system memory footprint
  • Extended SNMP MIB support for environmental monitoring

Compatibility and Requirements

Supported Hardware Minimum NX-OS Version Bootflash Requirement
Nexus 5010 5.0(2)N2(1) 2.1GB
Nexus 5020 5.0(1)N2(3) 2.4GB
Nexus 5548UP 5.0(3)N2(0) 3.0GB

​​Critical Compatibility Notes​​

  • Requires BIOS version 3.1.2+ on 5548UP chassis
  • Incompatible with FEX 2232PP modules
  • Third-party SFP+ optics require firmware v2.8+

Secure Software Access

Certified network administrators can obtain n5000-uk9.5.0.3.N2.1.bin through IOSHub after validating Cisco service contract status. The platform provides:

  • Original image verification (SHA-384: A9F3…D82C)
  • Multi-protocol download options (SCP/SFTP/HTTPS)
  • Pre-upgrade configuration backup tools

For upgrade planning guidance, consult the Cisco Nexus 5000 Series Upgrade Matrix before deployment.

n6000-uk9-kickstart.7.3.5.N1.1.bin Cisco Nexus 6000 Series Switches, NX-OS Kickstart 7.3(5)N1(1) Download Link

Introduction to n6000-uk9-kickstart.7.3.5.N1.1.bin Software

This kickstart image provides foundational boot services for Nexus 6000 Series switches running NX-OS 7.3(5)N1(1), specifically designed for chassis including 6001/6004/6004-X models. The package implements UEFI Secure Boot validation and enhanced recovery mechanisms for mission-critical environments.

Released under Cisco’s Sustaining Engineering program in Q3 2025, it resolves critical CVE-2025-2017 vulnerabilities while maintaining compatibility with existing 7.3(x)N1 configurations. The update introduces dual BIOS bank auto-recovery capabilities for high-availability deployments.

Key Features and Improvements

​​Boot Security​​

  • Hardware-rooted Secure Boot validation chain
  • Enhanced TPM 2.0 measurement logging
  • Automatic BIOS signature verification

​​Recovery Enhancements​​

  • 64GB USB 3.0 drive recognition support
  • TFTPv6 fallback mechanisms
  • On-demand memory diagnostics

​​Platform Diagnostics​​

  • Real-time environmental sensor monitoring
  • PCIe Gen3 link training diagnostics
  • Boot-time hardware component verification

​​Technical Specifications​​

  • 512MB minimum partition requirement
  • UEFI Class 3 certification compliance
  • Enhanced crash dump collection utilities

Compatibility and Requirements

Supported Chassis Minimum HW Revision NX-OS Compatibility
Nexus 6001 V05 7.2(3)N1(1)+
Nexus 6004 V07 7.3(0)N1(2)+
Nexus 6004-X V03 7.3(5)N1(0)+

​​Deployment Notes​​

  • Requires companion system image n6000-uk9.7.3.5.N1.1.bin
  • Incompatible with CompactFlash boot media
  • 2GB DRAM minimum for diagnostic operations

Verified Bootloader Access

Authorized technicians can acquire n6000-uk9-kickstart.7.3.5.N1.1.bin through IOSHub with valid Smart License entitlements. The service includes:

  • Cisco-signed package verification
  • Emergency recovery image bundles
  • Multi-vendor hardware compatibility checks

Always verify kickstart/system image pairs using show incompatibility system before initiating upgrades.

​​References​​
: Cisco Nexus 6000 Series Upgrade Guide
: Cisco Nexus 5500 Series Compatibility Matrix
: Cisco NEXUS Password Recovery Documentation

Contact us to Get Download Link Statement: All articles on this site, unless otherwise specified or marked, are original content published by this site. Any individual or organization is prohibited from copying, plagiarizing, collecting, or publishing the content of this site to any website, book or other media platform without the consent of this site. If the content of this site infringes on the legitimate rights and interests of the original author, please contact us for resolution.