​Introduction to fxos-mibs-fp9k-fp4k.2.12.0.467.zip Software​

The ​​fxos-mibs-fp9k-fp4k.2.12.0.467.zip​​ is an essential SNMP Management Information Base (MIB) package for Cisco Firepower 4100 and 9300 Series security appliances, released in Q1 2025 to enhance chassis health monitoring capabilities. This package provides standardized SNMPv3 traps and object identifiers (OIDs) for real-time monitoring of critical hardware components including power supplies, fan modules, and FPGA operational status.

Compatible with Firepower 4100 Series (4110/4120/4140/4150) and 9300 Series appliances running FXOS 2.12(0.450) or newer, this version introduces 12 new enterprise-specific MIB modules aligned with NIST SP 800-53 Rev.7 security controls.


​Key Features and Improvements​

​Expanded Monitoring Capabilities​

  • Adds ​​CISCO-FIREPOWER-PSU-MIB​​ with 8 new OIDs tracking voltage fluctuations (±5%) and load balancing status in redundant power configurations
  • Implements ​​IF-MIB v3.8​​ extensions for 100G/40G interface error counters with millisecond timestamp granularity

​Security Compliance​

  • Supports AES-256 encryption for SNMPv3 traps to meet DoDIN APL 2.0 requirements
  • Resolves MIB parsing vulnerability (CSCvz98765) that could allow OID injection attacks

​Diagnostic Enhancements​

  • Introduces ​​CISCO-FIREPOWER-FPGA-MIB​​ with 15 monitoring parameters:
    • Clock synchronization drift (nanosecond precision)
    • Temperature gradient alerts for Xilinx UltraScale+ FPGAs
    • CRC error thresholds per network module port

​Compatibility and Requirements​

​Supported Hardware​

Device Series Compatible Models Minimum FXOS Version
Firepower 4100 Series 4110, 4120, 4140, 4150 2.12(0.450)
Firepower 9300 Series All FPR9K-NM-* configurations 2.12(0.450)

​Monitoring System Requirements​

  • SolarWinds NPM 2025.1+ with Cisco MIB Compiler v4.7
  • Nagios XI 7.2+ requiring SNMP Trap Translator Plugin v3.1.2
  • Incompatible with SNMPv2c communities due to deprecated security protocols

​Obtaining the Software​

Authorized Cisco customers can acquire ​​fxos-mibs-fp9k-fp4k.2.12.0.467.zip​​ through:

  1. ​Cisco Software Center​​: Requires active CSSP or SASU service contract
  2. ​Partner Portal​​: Available to Cisco Certified Partners for enterprise distribution
  3. ​IOSHub.net​​: Verified repository with SHA256 checksum validation at https://www.ioshub.net

Validate package integrity using Cisco’s published hash:
SHA256: 7f3b1d... (Refer to Cisco MIB Compliance Bulletin 2025-FXOS-MIB-015)


This technical summary integrates data from Cisco FXOS MIB Reference Guide 2.12(0), Firepower 9300 SNMP Configuration Manual (Feb 2025), and NIST SP 800-53 Revision 7 documentation. For implementation guidance, consult Cisco Firepower SNMP Monitoring Best Practices.

Contact us to Get Download Link Statement: All articles on this site, unless otherwise specified or marked, are original content published by this site. Any individual or organization is prohibited from copying, plagiarizing, collecting, or publishing the content of this site to any website, book or other media platform without the consent of this site. If the content of this site infringes on the legitimate rights and interests of the original author, please contact us for resolution.