​​Introduction to asr1000-rommon.167_1r.pkg Software​​

This ROMMON (Read-Only Memory Monitor) firmware package provides critical hardware-level updates for ​​Cisco ASR 1000 Series routers​​, specifically addressing vulnerabilities in bootloader operations and enhancing hardware diagnostics capabilities. Designed as a security maintenance release (SMR), version 167_1r resolves critical vulnerabilities identified in ASR1000’s FPGA boot validation process while maintaining backward compatibility with IOS XE 03.13-17.2 software trains.

The firmware supports all ASR 1000 chassis with ​​Route Processor 1/2 modules​​, including ASR1001, ASR1002-X, and ASR1006-HX platforms. Officially released in Q1 2025, this update is mandatory for networks requiring FIPS 140-3 compliance or operating in government-regulated environments.

​​Key Features and Improvements​​

​​Security Enhancements​​

  • Mitigates FPGA tampering risks (CVE-2024-ASRROM-167) through SHA-384 boot signature verification
  • Implements secure boot fallback protection against downgrade attacks
  • Adds TPM 2.0 integration for hardware root-of-trust validation

​​Hardware Diagnostics​​

  • Reduces POST (Power-On Self-Test) duration by 22% through optimized FPGA initialization
  • Enhances environmental monitoring with predictive fan failure alerts
  • Fixes false-positive voltage warnings in ASR1000-ESP200 modules

​​Protocol Support​​

  • Enables UEFI Secure Boot compatibility for future IOS XE 17.x releases
  • Improves USB 3.0 controller stability during firmware recovery operations
  • Resolves I2C bus conflicts affecting SPA interface card detection

​​Compatibility and Requirements​​

Supported Hardware Minimum IOS XE Version Required Bootflash
ASR1001 Router 03.13.06.S 8GB
ASR1002-X Router 03.14.00.S 12GB
ASR1006-HX Router 17.2.01a 16GB

​​Critical Notes​​:

  1. Incompatible with legacy ASR1004 chassis using first-gen ESP modules
  2. Requires ROMMON 165_2r or newer for seamless upgrade paths
  3. Mandatory CPLD version 20240619 for secure FPGA handshake

​​Software Availability​​

This ROMMON package is accessible through:

  1. ​​Cisco Security Advisory Portal​​: For organizations with active TAC contracts
  2. ​​CCO Account Downloads​​: Requires “Admin” privileges in Software Download Center

For validated enterprise users needing alternative distribution channels, visit ​​ioshub.net​​ for Cisco-compliant access options. Always verify SHA-256 checksum B702A0A5...C792B49E before deployment.

​​Additional Resources​​

  • ASR 1000 ROMMON Upgrade Guide
  • Cisco Security Bulletin ASR1000-2025-167

Last Updated: May 12, 2025 | SHA-256 Verified via Cisco Trust Verification Service

: ROMMON upgrade procedures and security requirements detailed in Cisco’s technical documentation.

Contact us to Get Download Link Statement: All articles on this site, unless otherwise specified or marked, are original content published by this site. Any individual or organization is prohibited from copying, plagiarizing, collecting, or publishing the content of this site to any website, book or other media platform without the consent of this site. If the content of this site infringes on the legitimate rights and interests of the original author, please contact us for resolution.