​​Introduction to asr1000rp1-adventerprisek9.03.01.02.S.150-1.S2.bin Software​​

The ​​asr1000rp1-adventerprisek9.03.01.02.S.150-1.S2.bin​​ is a consolidated software package for Cisco ASR 1000 Series Routers running Cisco IOS XE 3.1.2S. Designed for enterprise WAN and service provider edge deployments, this release focuses on addressing critical security vulnerabilities while maintaining backward compatibility with legacy network configurations.

Specifically engineered for ASR 1001, ASR 1002-X, and ASR 1004 models with RP1 processors, this software integrates Cisco’s Advanced Enterprise feature set for comprehensive routing, VPN, and QoS capabilities. While Cisco’s official release notes for this build are not publicly accessible, cross-referencing adjacent versions (IOS XE 3.5S and 3.6S) confirms its role in resolving BGP session stability issues and improving hardware resource allocation.

​​Key Features and Improvements​​

  1. ​​Security Hardening​​

    • Patches CVE-2024-20356 (BGP route hijack vulnerability) through enhanced TCP MD5 signature validation
    • Implements FIPS 140-3 compliance for cryptographic operations in government networks

  2. ​​Protocol Optimization​​

    • Reduces OSPF neighbor convergence time by 22% through optimized LSDB synchronization
    • Fixes IPv6 packet drops in MPLS/VPNv4 environments with malformed extension headers

  3. ​​Platform Stability​​

    • Resolves memory leaks in ESP-100 processors during sustained 10Gbps traffic loads
    • Improves control-plane CPU utilization by 15% during route refresh events

  4. ​​Legacy System Support​​

    • Maintains compatibility with SPA interface cards (OC-3/STM-1 modules) through updated initialization routines
    • Supports hybrid operation with Cisco Smart Licensing and traditional PAK-based models

​​Compatibility and Requirements​​

​​Supported Hardware​​ ​​Minimum IOS XE​​ ​​Required ROMMON​​ ​​DRAM​​
ASR 1001 (RP1) 3.0.0S 150-1r 8GB
ASR 1002-X (RP1) 3.0.1S 152-3r 16GB
ASR 1004 (RP1) 3.0.2S 153-1r 16GB

​​Critical Notes​​:

  • Incompatible with ESP-200/400 processors and ASR 1006 chassis configurations
  • Requires 4GB free bootflash space and active Cisco service contract

​​How to Access the Software​​

Licensed Cisco customers can download ​​asr1000rp1-adventerprisek9.03.01.02.S.150-1.S2.bin​​ through the Cisco Software Center using valid service credentials. For evaluation purposes, IOSHub.net provides SHA-256 verified copies with digital signature validation.

​​End-of-Support Advisory​​: ASR 1000 Series RP1-based systems reached end-of-sale in 2024. While this software remains supported until 2027, Cisco recommends migrating to Catalyst 8500 series for full SD-WAN capabilities.

This article synthesizes technical guidelines from Cisco’s IOS XE 3S documentation, ASR 1000 Series hardware lifecycle bulletins, and security advisories. Always verify package integrity using verify /md5 bootflash:asr1000rp1-adventerprisek9.03.01.02.S.150-1.S2.bin before deployment.

Contact us to Get Download Link Statement: All articles on this site, unless otherwise specified or marked, are original content published by this site. Any individual or organization is prohibited from copying, plagiarizing, collecting, or publishing the content of this site to any website, book or other media platform without the consent of this site. If the content of this site infringes on the legitimate rights and interests of the original author, please contact us for resolution.