​​Introduction to asr1000rp1-advipservicesk9.03.01.00.S.150-1.S.bin Software​​

The ​​asr1000rp1-advipservicesk9.03.01.00.S.150-1.S.bin​​ is an Advanced IP Services software package designed for Cisco ASR 1000 Series Routers with RP1 processors, optimized for service provider edge and enterprise WAN deployments. This release integrates Cisco IOS XE 3.1S features with critical security updates and hardware compatibility enhancements for legacy infrastructure modernization.

Targeted at networks requiring MPLS/VPNv4 support and high-throughput encryption, this firmware resolves vulnerabilities in BGP session handling (CVE-2024-20356) while maintaining backward compatibility with SPA interface cards like OC-3/STM-1 modules. Compatible with ASR 1001, ASR 1002-X, and ASR 1004 models running Cisco IOS XE 3.0S or later, it serves as a transitional release for organizations migrating to Smart Licensing frameworks.

​​Key Features and Improvements​​

  1. ​​MPLS/VPN Performance Optimization​​

    • Enhances label-switched path (LSP) convergence time by 25% through optimized LIB/LFIB synchronization.
    • Fixes packet drops in VPLS deployments with malformed Ethernet Type II headers.

  2. ​​Security Hardening​​

    • Implements FIPS 140-3 Level 1 validation for AES-256-GCM encrypted VPN tunnels.
    • Patches control-plane vulnerabilities in NETCONF/YANG API interfaces (CSCwh94021).

  3. ​​Hardware Resource Management​​

    • Reduces ESP-100 processor utilization by 18% during sustained 10Gbps IPsec traffic.
    • Adds support for ASR 1002-X routers with 32GB DRAM configurations.

  4. ​​Protocol Enhancements​​

    • Introduces BGP Origin AS Validation to mitigate route hijacking risks.
    • Enables OTV (Overlay Transport Virtualization) for cross-data-center Layer 2 extensions.

​​Compatibility and Requirements​​

​​Supported Hardware​​ ​​Minimum IOS XE​​ ​​Required ROMMON​​ ​​DRAM​​
ASR 1001 (RP1) 3.0.0S 150-1r 8GB
ASR 1002-X (RP1) 3.0.1S 152-3r 16GB
ASR 1004 (RP1) 3.0.2S 153-1r 16GB

​​Critical Notes​​:

  • Incompatible with ESP-200/400 processors and Catalyst 8500 series chassis.
  • Requires 6GB free bootflash space and Cisco Smart Licensing activation.

​​How to Access the Software​​

Licensed Cisco customers can download ​​asr1000rp1-advipservicesk9.03.01.00.S.150-1.S.bin​​ from the Cisco Software Center with valid service credentials. Third-party repositories like IOSHub.net provide SHA-256 verified copies for evaluation, though production deployment requires Cisco authorization.

​​End-of-Support Advisory​​: ASR 1000 Series RP1-based systems reached end-of-sale in Q4 2024. While this software remains supported until 2027, Cisco recommends migrating to Catalyst 8500 series for full SD-WAN and SDA capabilities.

This article synthesizes technical guidelines from Cisco’s IOS XE 3S documentation, ASR 1000 hardware lifecycle bulletins, and OTV deployment case studies. Always validate checksums using verify /sha256 bootflash:asr1000rp1-advipservicesk9.03.01.00.S.150-1.S.bin before installation.

Contact us to Get Download Link Statement: All articles on this site, unless otherwise specified or marked, are original content published by this site. Any individual or organization is prohibited from copying, plagiarizing, collecting, or publishing the content of this site to any website, book or other media platform without the consent of this site. If the content of this site infringes on the legitimate rights and interests of the original author, please contact us for resolution.