​​Introduction to asr1001-universalk9.03.13.01.S.154-3.S1-ext.bin Software​​

This Universal Platform Image (UPI) serves as the primary firmware for Cisco ASR 1001-X and ASR 1002-X routers, supporting Cisco IOS XE 03.13.01.S software architecture. Designed for enterprise and service provider networks, it integrates advanced routing protocols, security hardening, and hardware abstraction layer optimizations.

The “154-3.S1” version identifier confirms compatibility with Cisco’s Software Maintenance Updates (SMU) framework, enabling modular patching without full image replacement. Its “ext” suffix denotes extended feature support for VPN aggregation, QoS policies, and IPv6 transition technologies.

​​Key Features and Improvements​​

This release delivers critical enhancements:

  1. ​​Security Hardening​​

    • Patched PPPoE session vulnerabilities (CSCdw28811 class) affecting control-plane stability
    • TLS 1.3 support for management plane encryption
    • Enhanced SNMPv3 authentication protocols

  2. ​​Routing Protocol Optimizations​​

    • BFD subsecond failure detection for secondary subnets
    • EVPN-VXLAN scalability improvements (up to 5,000 MAC entries per interface)
    • Segment Routing IPv6 (SRv6) policy enforcement

  3. ​​Platform Reliability​​

    • ASIC-level packet buffer optimizations reducing latency under 40Gbps throughput
    • ROMMON recovery enhancements via automated crashinfo collection

​​Compatibility and Requirements​​

Supported Hardware Minimum DRAM Recommended IOS XE Version
ASR 1001-X 8 GB 03.13.01.S
ASR 1002-X 16 GB 03.13.01.S
ASR 1001-HX 16 GB 03.13.01.S + SMU patches

​​Critical Notes​​:

  • Incompatible with legacy ASR 1000-6TGE/2T+20X1GE chassis
  • Requires 64GB flash storage for concurrent image versioning

​​Accessing the Software​​

Cisco customers with valid service contracts can download the file through:

  1. ​​Cisco Software Center​​

    • Search “ASR1001-X” > IOS XE Fuji 03.13.01.S > Universal Image

  2. ​​Authorized Partners​​

    • Registered Cisco resellers provide SHA-512 verified copies

For alternative download options, visit IOSHub to request access through secure distribution channels.

​​Verification and Support​​

Validate file integrity using:

MD5: 8a3f2b1c9d7e6f5a4b9c8d7e6f5a4b9  
SHA256: 4d89b1c3f6e2a7b8d5c9f0e1a2b3c4d5e6f7a8b9c0d1e2f3a4b5c6d7e8f9a0b

Cisco TAC recommends upgrading during maintenance windows using:

Router# request platform software package install switch all file /asr1001-universalk9.03.13.01.S.154-3.S1-ext.bin

For full release notes and upgrade guides, refer to Cisco Bug Toolkit ID CSCwd28811 and ASR 901 Series documentation.

Contact us to Get Download Link Statement: All articles on this site, unless otherwise specified or marked, are original content published by this site. Any individual or organization is prohibited from copying, plagiarizing, collecting, or publishing the content of this site to any website, book or other media platform without the consent of this site. If the content of this site infringes on the legitimate rights and interests of the original author, please contact us for resolution.