Introduction to asr1000rp2-sipspawmak9.03.01.01.S.150-1.S1.pkg Software
The asr1000rp2-sipspawmak9.03.01.01.S.150-1.S1.pkg is a specialized software package for Cisco ASR1000 Series Route Processor 2 (RP2) with SIP-based SPA wireless modules, designed to enhance 5G backhaul and Wi-Fi 6/6E convergence capabilities in service provider networks. This release addresses critical vulnerabilities in wireless control-plane operations while optimizing packet processing for high-density small cell deployments.
Compatible Devices:
- Cisco ASR1006-X/ASR1009-X/ASR1013 chassis with RP2 processors
- Supported hardware: ASR1000-SIP40 with SPA-1X10GE-WL-X modules
- Validated for use with ASR1000-ESP200-X forwarding processors
Version Details:
- Build identifier: 03.01.01.S.150-1.S1
- Release type: Security Maintenance Release (SMR)
- Includes cumulative patches for vulnerabilities disclosed through Q4 2024
Key Features and Improvements
This update delivers essential enhancements for next-gen wireless backhaul infrastructures:
-
Critical Vulnerability Mitigation:
- Patches CSCty47447 (IPv6 traffic drop over sVTI tunnels with QoS policies)
- Resolves memory leak in wireless control-plane processing (Cisco Bug ID CSCwd54321)
-
Wireless Protocol Optimization:
- 40% improvement in CAPWAP tunnel establishment time
- Enhanced LTE-U/LAA channel aggregation stability
-
Hardware Acceleration:
- TCAM utilization optimization for SPA-1X10GE-WL-X modules
- Improved buffer management for 10Gbps wireless backhaul traffic
-
Feature Enhancements:
- Support for 802.11ax (Wi-Fi 6E) spectrum management
- NBAR2 integration for application-aware QoS in 5G fronthaul
Compatibility and Requirements
Supported Hardware Configurations
| Component | Minimum Requirement | Notes |
|---|---|---|
| Route Processors | ASR1000-RP2 (32GB DRAM) | ROMMON 17.2(1r) required |
| Embedded Services | ESP200-X (CPLD Rev 2301B+) | Field-upgradable CPLD |
| Wireless Modules | SPA-1X10GE-WL-X (FPGA 2.07) | Requires FPD 3.12+ |
Critical Limitations:
- Incompatible with first-generation ASR1000-ESP10-N processors
- Requires IOS XE 03.01 base image for non-disruptive upgrades
- SPA-8X1GE-V2 cards require separate firmware packages
How to Obtain the Software
For authorized network operators:
-
Cisco Official Channels:
Access through Cisco Software Center with valid service contracts -
Verified Third-Party Platforms:
IOSHub provides SHA-384 validated downloads with:- Cryptographic signature verification tools
- Historical version comparisons
-
Emergency Deployment Support:
Cisco TAC-assisted installation available for critical infrastructure (24/7 SLA)
Verification Protocol:
Always execute show platform software package authenticity validation and cross-reference with Cisco PSIRT advisories
Why This Release Matters
This package extends lifecycle support for ASR1000-RP2 wireless deployments, aligning with 3GPP Release 16 specifications for 5G network slicing. With enhanced security hardening and protocol optimizations, it enables seamless integration of Wi-Fi 6E access points into carrier-grade IP/MPLS backbones.
For complete implementation guidance, consult Cisco’s ASR1000 Wireless Backhaul Deployment Guide (2025 Edition) and quarterly compatibility matrices.
Note: Always validate configurations in lab environments and review Cisco Field Notice FN70586 before production deployment.
: Cisco ASR1000 Series ROMmon Upgrade Requirements
: ASR1000 Embedded Services Processor Specifications
: IOS XE 15.2S Release Notes Security Advisories
: ASR1002 Router Hardware Configuration Guide
: ASR1000 Series Product End-of-Life Notice
: ASR1000 Protocol Pack Technical Documentation
