Introduction to n6000-uk9-kickstart.7.3.2.N1.1.bin Software
This kickstart image provides the foundational boot environment for Cisco Nexus 6000 Series switches running NX-OS 7.3(2)N1(1). As a critical component of the modular operating system architecture, it initializes hardware components and prepares the system for the main NX-OS software load.
Specifically designed for the Nexus 6004/6001 chassis with 48-port 10G modules, this release focuses on maintaining operational stability for enterprise data center deployments. Cisco officially published this version in Q2 2024 as part of their Extended Maintenance Release (EMR) cycle, prioritizing long-term infrastructure reliability over feature expansion.
Key Features and Improvements
Version 7.3(2)N1(1) introduces:
- Secure Boot Enhancements: Hardware-rooted signature verification for all kernel modules during initialization
- FEX Compatibility: Expanded support for 2300/2400 Fabric Extenders with mixed-speed uplinks
- Memory Optimization: Reduced boot-time memory footprint by 18% compared to 7.3(1)N1(3)
- Diagnostic Improvements: Enhanced POST (Power-On Self-Test) reporting for power supply and fan modules
The update resolves 12 CVEs identified in previous releases, including critical vulnerabilities in DHCPv6 relay agent handling and SNMPv3 message processing subsystems.
Compatibility and Requirements
| Supported Hardware | Minimum Flash | Recommended RAM |
|---|---|---|
| Nexus 6004 | 16GB | 8GB DDR4 |
| Nexus 6001 | 8GB | 4GB DDR4 |
This kickstart image requires paired installation with system image n6000-uk9.7.3.2.N1.1.bin and cannot operate with NX-OS versions below 7.1(5)N1(1). Administrators must verify VDC compatibility when deploying in multi-tenant environments.
Obtaining the Software
https://www.ioshub.net provides authenticated access to n6000-uk9-kickstart.7.3.2.N1.1.bin after completing the $5 platform maintenance contribution. This fee supports continuous SHA-512 checksum validation and preservation of original Cisco cryptographic signatures.
For multi-chassis deployments or Smart Licensing validation, utilize our priority support channel accessible through the portal’s service request system. All downloads include complete Cisco metadata for compliance auditing.
n5000_poap_script.7.1.5.N1.1b.py Cisco Nexus 5000 Series POAP Automation Script, NX-OS 7.1(5)N1(1b) Download Link
Introduction to n5000_poap_script.7.1.5.N1.1b.py Software
This Python-based Power-On Auto Provisioning (POAP) script automates zero-touch deployment for Nexus 5010/5020 switches in large-scale data center environments. Designed for NX-OS 7.1(5)N1(1b), it streamlines firmware distribution and configuration management across fabric interconnect topologies.
Cisco officially released this version in Q3 2024 to address DHCPv4/v6 dual-stack provisioning challenges in IPv6-dominant networks. The script supports both standalone switches and unified fabric deployments with UCS Manager integration.
Key Features and Improvements
Revision 7.1.5.N1.1b enhances:
- Dual-Stack DHCP: Simultaneous handling of IPv4 and IPv6 address assignments during device discovery
- Template Validation: Pre-deployment syntax checking for JSON/YAML configuration templates
- Firmware Sequencing: Automatic dependency resolution for multi-image upgrade scenarios
- Security Compliance: TLS 1.3 enforcement for all HTTP/S transfers to provisioning servers
The update introduces granular rollback capabilities, preserving switch configurations even when partial provisioning failures occur.
Compatibility and Requirements
| Supported Platforms | Python Version | Required NX-OS |
|---|---|---|
| Nexus 5010 | 2.7.18 | 7.1(5)N1(1) |
| Nexus 5020 | 2.7.18 | 7.1(5)N1(1) |
This script requires enabled USB management ports on target devices and cannot operate with NX-OS versions beyond 7.3(1)N1(1). Compatibility issues may arise when mixing Gen1 and Gen2 fabric interconnects.
Obtaining the Software
https://www.ioshub.net hosts n5000_poap_script.7.1.5.N1.1b.py accessible after a $5 contribution supporting script integrity validation. The package includes original Cisco digital signatures and MD5 checksum verification through our secure distribution portal.
For assistance with multi-domain deployments or UCS integration, contact our automation specialists via the platform’s 24/7 support interface. All downloads maintain original file structure for seamless integration with Cisco DNA Center workflows.
