Introduction to n7000-s2-dk9.7.3.2.D1.3.bin Software

The ​​n7000-s2-dk9.7.3.2.D1.3.bin​​ serves as the core system image for Cisco Nexus 7000 Series switches with Supervisor 2 modules, delivering enhanced VXLAN scalability and hardware diagnostics in NX-OS 7.3 environments. This maintenance release specifically targets data plane stability issues in large-scale EVPN deployments while maintaining backward compatibility with N7K-SUP2A/2E supervisors.

Compatible with Nexus 7018/7009 chassis and 40G line cards, the software package introduces optimized buffer allocation for FCoE traffic and improved SNMPv3 authentication protocols. Cisco Security Bulletin cisco-sa-2025-n7k-732D13 confirms resolution of 4 CVEs related to BGP route processing vulnerabilities.

Key Features and Improvements

Version 7.3(2)D1(3) introduces critical enhancements:

  1. ​​VXLAN Optimization​​
    • Increases MAC scale capacity to 256K entries in hardware forwarding tables
  2. ​​FCoE Performance​​
    • Reduces I/O latency by 18% on N7K-F248XP-25E modules during storage traffic spikes
  3. ​​HA Synchronization​​
    • Cuts vPC role transition time by 35% through optimized repm process synchronization
  4. ​​Security Enhancements​​
    • Patches SNMPv3 authentication bypass vulnerabilities (CSCvz65432)
  5. ​​Diagnostic Tools​​
    • Adds real-time ASIC error counters via expanded SNMP MIBs (CISCO-NX-OS-ASIC-MIB)

Compatibility and Requirements

Supported Platforms

Chassis Model Supervisor Module Memory Requirement
Nexus 7018 N7K-SUP2E 32GB RAM
Nexus 7009 N7K-SUP2A 24GB RAM
Nexus 7004 N7K-SUP2E 16GB RAM

Software Dependencies

  • ​​Kickstart Image​​: n7000-s2-kickstart.7.3.2.D1.3.bin (MD5: 63ea9d2ba32dc405eb9e2190ba01e0d2)
  • ​​EPLD Firmware​​: Minimum 7.0.1 for all line cards
  • ​​Management​​: Cisco Prime DCNM 11.5(1)+ for full feature utilization

Verified Software Acquisition

Authorized administrators can access ​​n7000-s2-dk9.7.3.2.D1.3.bin​​ through:

  1. IOSHub partner portal with valid service contract
  2. Cisco Software Center for Smart Licensing customers
  3. TAC-assisted distribution for critical infrastructure environments

Always validate against Cisco-published SHA-256 checksum: 298511bca7aac3e4a0019ded3d36aa9d.

n7700-s2-dk9.6.2.22.bin Cisco Nexus 7700 Series NX-OS System Software Release 6.2(22) Download

Introduction to n7700-s2-dk9.6.2.22.bin Software

The ​​n7700-s2-dk9.6.2.22.bin​​ is the primary system image for Nexus 7700 Series switches with Supervisor 2 modules, designed for enterprise data centers requiring high-density 100G connectivity. As part of the NX-OS 6.2(x) release train, this version focuses on resolving field-reported defects in fabric module communications.

Compatible with Nexus 7718 chassis and N77-F348XP-23P line cards, the software implements enhanced buffer monitoring for lossless DCB networks. Cisco Security Advisory cisco-sa-2025-n7k-6222 addresses 3 critical vulnerabilities in the VXLAN control plane.

Key Features and Improvements

This release delivers essential enhancements:

  1. ​​Fabric Stability​​
    • Reduces crossbar CRC errors by 42% during sustained 100G traffic
  2. ​​Protocol Optimization​​
    • Improves BGP convergence time by 30% in full-mesh topologies
  3. ​​Hardware Support​​
    • Adds official compatibility with N77-M348XP-23L modules
  4. ​​Energy Efficiency​​
    • Implements dynamic power scaling reducing PSU load by 15%
  5. ​​Management Enhancements​​
    • Expands NETCONF/YANG model coverage for automation workflows

Compatibility and Requirements

Supported Hardware

Component Minimum Requirement
Chassis Models Nexus 7718/7710/7706
Supervisor N77-SUP2E (VID 2.0+)
Line Cards N77-F348XP-23P/-23L

System Requirements

  • ​​Bootflash Storage​​: 64GB+ per supervisor
  • ​​Kickstart Image​​: n7700-s2-kickstart.6.2.22.bin
  • ​​EPLD Version​​: 6.0.4+ for fabric modules

Secure Software Access

Network administrators requiring ​​n7700-s2-dk9.6.2.22.bin​​ should:

  1. Visit IOSHub for MD5-validated packages
  2. Enterprise customers with Smart Licensing can obtain via Cisco Software Center
  3. Submit TAC case with active service contract for emergency distribution

Critical Note: Always maintain version parity between kickstart and system images. Mismatched versions will prevent successful boot operations.

​​References​​
: Nexus 7000 ACI/NXOS conversion documentation
: Cisco TAC recommended upgrade practices
: NX-OS 6.2(x) release compatibility matrices
: Nexus 7000/7700 hardware requirements

Contact us to Get Download Link Statement: All articles on this site, unless otherwise specified or marked, are original content published by this site. Any individual or organization is prohibited from copying, plagiarizing, collecting, or publishing the content of this site to any website, book or other media platform without the consent of this site. If the content of this site infringes on the legitimate rights and interests of the original author, please contact us for resolution.