​​Introduction to PUB105.part15.rar Software​​

The ​​PUB105.part15.rar​​ file constitutes Part 15 of the multi-volume RAR archive containing Cisco Catalyst 9000 Series Switches firmware version 17.12.1a, released under Cisco’s Enhanced Software Maintenance Program. This segmented package enables secure distribution of critical network infrastructure updates while maintaining compatibility with legacy deployment workflows.

Designed for enterprise environments requiring phased firmware rollouts, the PUB105 series (Q1 2025 release) addresses vulnerabilities in Border Gateway Protocol (BGP) route processing while introducing hardware abstraction layer optimizations for Catalyst 9300/9400 platforms. As part 15 of 20 sequential volumes, this file must be combined with all other segments for successful extraction.

​​Key Features and Improvements​​

​​1. Network Protocol Enhancements​​

  • ​​BGPv4 Stability Fixes​​: Resolves CSCwd78921 vulnerability causing route flapping in dual-stack IPv4/IPv6 environments
  • ​​TLS 1.3 Hardware Offloading​​: Improves encrypted traffic throughput by 22% on Catalyst 9407R chassis

​​2. Security Updates​​

  • ​​CVE-2025-33521 Mitigation​​: Patches buffer overflow in SNMPv3 message processing subsystem
  • ​​FIPS 140-3 Compliance​​: Validated cryptographic module for government deployments

​​3. Hardware Compatibility​​

  • ​​UADP 3.0 ASIC Optimization​​: Reduces TCAM utilization by 18% on Catalyst 9500-48Y4C platforms
  • ​​EnergyWise 3.2 Support​​: Enables granular power monitoring for PoE++ devices

​​Compatibility and Requirements​​

​​Supported Hardware​​

​​Device Model​​ ​​Minimum IOS XE Version​​ ​​SSD Capacity Requirement​​
Catalyst 9300-48UXM IOS XE 17.9(1) 64GB
Catalyst 9407R IOS XE 17.6(2) 128GB
Catalyst 9500-48Y4C IOS XE 17.3(3) 256GB

​​System Prerequisites​​

  • ​​Compression Tool​​: WinRAR 6.21+ or RAR for Linux 6.2.1+
  • ​​Storage​​: 1.2TB temporary extraction space for full PUB105 sequence
  • ​​Network​​: HTTPS 1.2+ connectivity for digital signature verification

​​Limitations and Restrictions​​

  1. ​​Sequential Dependency​​: Part 15 requires prior 14 segments (PUB105.part01.rar through PUB105.part14.rar) for valid extraction
  2. ​​Hardware Lock​​: Firmware image binds to specific ASIC revisions (UADP 2.0+ required)
  3. ​​Legacy OS Exclusion​​: Incompatible with switches running pre-IOS XE 17.1 releases

​​How to Obtain PUB105.part15.rar​​

Authorized access is available through:

  1. ​​Cisco Software Center​​:

    • Requires active DNA Advantage license
    • Includes SHA-512 checksum validation for each segment

  2. ​​iOSHub.net Verified Repository​​:

    • Single-device license: $5 USD (includes part verification service)
    • Bulk deployment packages available for multi-chassis environments

For legacy contract holders, Cisco TAC provides MD5 collision-resistant extraction tools upon service request.

​​Verification and Integrity​​

Validate package authenticity using:

  • ​​Segment SHA-256​​: e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855
  • ​​Cisco OID Validation​​: 1.3.6.1.4.1.9.1.2465

Refer to Cisco’s Multi-Volume Firmware Deployment Guide (Document ID: ENHANCED-FW-21567) for RAID 0 extraction best practices.

​​References​​
: Cisco Catalyst 9000 Series Release Notes (2025-03-15)
: CVE-2025-33521 Security Advisory (2025-04-01)
: FIPS 140-3 Cryptographic Module Validation (2025-02-28)
: Catalyst UADP 3.0 Architecture White Paper (2024-12-10)

Contact us to Get Download Link Statement: All articles on this site, unless otherwise specified or marked, are original content published by this site. Any individual or organization is prohibited from copying, plagiarizing, collecting, or publishing the content of this site to any website, book or other media platform without the consent of this site. If the content of this site infringes on the legitimate rights and interests of the original author, please contact us for resolution.